DESCRIPTION
The cLS-FSTS-GPS contains a Furno GN-80 module. The
module is connected via a jumper selection group to the
Tower System MCU. The MCU communicates is via a
serial port. A second serial port connection is avaialble
for debug workThis uses 1x5 connector (allows usage of
USB-to-Serial cable). The active antenna power sectionis
built into the GPS module. Built-in coxial cable pigtail
with bulkhead SMA connector.
Board ships with full schematics and code sample. Also
included is an excel spreadsheet to be included with the
Freescale Tower Configuration Tool.
MODULE INTERFACE
• 2 serial communications interfaces (UART) up to 115k Baud
• Low Power Modes STANDBY
• NMEA0183 output protocol
MODULE PERFORMANCE
- 16-channel, L1 (1575.42 MHz) GPS receiver Acquisition Time
•Acquisition Sensitivity
-141dBm warm
• Cold Start 42 seconds
• Warm Start 35 seconds
• Hot Start 8 seconds
• Reacquisition Time
2.0 seconds average
- Accuracy
• Position:
2 meters, CEP 50%
• Altitude:
<+/- 5m vertical
• Velocity:
0.1 m/s
SPECIFICATIONS
Interface:
Selectable as required to conform to Tower System.
Physical Characteristics:
Freescale Tower System Format
Power Requirements:
Supply Voltage (Typical)
3.3V (3.0V - 3.6V)
Current (Typical)
TBA
Environmental Characteristics:
Operating Temperature:
-200C to 900C
Storage Temperature:
-400C to 1050C
Relative Humidity:
0 to 90% non-Condensing
MODEL NUMBERS
cLS-FSTS-GPS:
GPS card w/Active antenna
Made with Xara Web Designer
GPS Receiver
Product Brief - Revision A
15 October 2009
To access the PDF
schematic of the GPS
board, press the button.
Access the software
applications by pressing
the button.
NOT
AVAILABLE
Currently
In process
To access the PDF copy
of this document, press
the button.
c-Link Systems, Inc. Copyright 2010, 2011
included is an excel spreadsheet to be included with the
Freescale Tower Configuration Tool.
MODULE INTERFACE
• 2 serial communications interfaces (UART) up to 115k Baud
• Low Power Modes STANDBY
• NMEA0183 output protocol
MODULE PERFORMANCE
- 16-channel, L1 (1575.42 MHz) GPS receiver Acquisition Time
•Acquisition Sensitivity
-141dBm warm
• Cold Start 42 seconds
• Warm Start 35 seconds
• Hot Start 8 seconds
• Reacquisition Time
2.0 seconds average
- Accuracy
• Position:
2 meters, CEP 50%
• Altitude:
<+/- 5m vertical
• Velocity:
0.1 m/s
SPECIFICATIONS
Interface:
Selectable as required to conform to Tower System.
Physical Characteristics:
Freescale Tower System Format
Power Requirements:
Supply Voltage (Typical)
3.3V (3.0V - 3.6V)
Current (Typical)
TBA
Environmental Characteristics:
Operating Temperature:
-200C to 900C
Storage Temperature:
-400C to 1050C
Relative Humidity:
0 to 90% non-Condensing
MODEL NUMBERS
cLS-FSTS-GPS:
GPS card w/Active antenna
Made with Xara Web Designer
GPS Receiver
Product Brief - Revision A
15 October 2009
To access the PDF
schematic of the GPS
board, press the button.
Access the software
applications by pressing
the button.
NOT
AVAILABLE
Currently
In process
To access the PDF copy
of this document, press
the button.
c-Link Systems, Inc. Copyright 2010, 2011